不锈钢301盐雾测试报告
盐雾试验的步骤:
(1) 采用有机溶剂清洗试样表面,使试样表面无油污和其他对镀层具有腐蚀的物品。
(2) 将试片置于盐雾箱中,试片受试面朝上与垂直线成15º~30º。
(3) 按检验周期规定进行盐雾试验。
(4) 取出试样用流动水轻轻冲洗或用海绵带水轻轻擦拭表面除去盐沉积物,然后在80ºC~ 100ºC干燥30min左右。
(5) 对试样的腐蚀等级给予评判。
采用标准:
ASTM G85 annex A:Standard Practice for Modified Salt Spray (Fog) Testing
GB/T 10125:人造气氛腐蚀试验 盐雾试验
ISO 9227:Corrosion tests in artificial atmospheres -- Salt spray tests
JIS Z2371:盐雾试验方法
AS 2331.3.2:Methods of test for metallic and related coatings - Corrosion and related property tests - Acetic acid salt spray test (ASS test)
ASTM B368:Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray(Fog)Testing (CASS Test)
AS 2331.3.3:Methods of test for metallic and related coatings - Corrosion and related property tests - Acetic acid salt spray test (ASS test)
GB/T 12967.3:铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验)
ASTM B117:Standard Practice for Operating Salt Spray (Fog) Apparatus
GB/T 2423.18:环境试验 第2部分:试验方法 试验Kb:盐雾,交变(氯化钠溶液)
GB/T 1771:色漆和清漆 耐中性盐雾性能的测定
GB/T 2423.17:电工电子产品环境试验 第2部分: 试验方法 试验Ka:盐雾